Coating Thickness Gauge NOVOTEST TP-2020
Coating thickness gauge NOVOTEST TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dewpoint temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge).
Design of the device
Adhesion tester AP-1M consists of a body with removable clamp for holding the peelable strip of tested material with built-in dynamo-meter were breakout force is displayed. The design of the instrument allows user to set (control) the angle of peeling.
The dynamo-meter’s scale is applied to pull the rod, that significantly improves it’s usability, compared to existing analogues: user’s hand never overrides the scale of the instrument. Adhesion tester has reliable construction of stainless steel, that guarantees it’s long life. The design of instrument allows user to operate at low temperatures or conditions of high humidity and dust.
Advantages:
- Measures coating thickness on ferrous (Fe) and non-ferrous (nFe) metals
- Automatic sensor detection
- Wide range of sensors for different tasks
- Selecting units of measure
- Storing individual calibrations in probes memory
- Average calculation, minimum and maximum indication
- High measurement accuracy
- Transfer of measurement data to PC via usb
- Portability
- Large buttons
- Enlarged screen
- Shockproof housing with a special protective silicone bumper case
- Charge control
| Thickness measurement range (depends on probe type) | 0 µm … 60 mm (60 000 µm/2,3622 inch) |
| Measured parameter |
coating thickness corrosion depth roughness temperature humidity dew point temperature |
| Measuring units |
μm mm inch mil |
| Revision modes | calculation of average, indication of minimum and maximum |
| PC connection |
Online – NOVOTEST.INFO/USB-connect Offline – NOVOTEST USB-Connect |
| Wireless connection with Android gadgets via NOVOTEST Lab App |
TP-2020 – No TP-2020 (Lab) – Yes |
| Storage capacity of measurement results |
TP-2020 – 256 TP-2020 (Lab) – 256 in the device + in NOVOTEST Lab App limited only by the memory of the Android gadgets |
| Menu languages | English, Spanish, French, Russian(*other languages by request) |
| Dimensions, mm | 122x60x25 |
| Operating temperature range, ° C | -20 … +40 ° C |
| Batteries | 2 AA |
| Type of connectors of probes | Lemo |
| Standards | AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ASTM G 12, BS 5599, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2178, ISO 2360, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32, ASTM D 1186-B, ASTM D 1400, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, DIN 50981, DIN 50984, ECCA T1, ISO 2808-6A, ISO 2808-6B, SS 184159 |
| Time of continuous work hours, not less | 20 |
| Weight of electronic unit with batteries, no more, kg | 0.2 |
| Package gross weight, kg | 1.7 |